Microsoft Intune
Device security

Prerequisites the Microsoft Tunnel VPN for Microsoft Intune - Microsoft Intune | Microsoft Learn

In brief

The prerequisites page now explains how to use `mst-readiness` and `mst-cli diagnose` to check installation and logging requirements, including connectivity, proxy, and rootless Podman guidance.

What Intune admins need to know

Administrators can use the documented diagnostics and troubleshooting links to identify logging issues and verify collection or upload prerequisites.

This summary was assembled from the tracked documentation change. Verify important details in the full Microsoft Learn article.

Documentation change

The comparison below shows only the changed extract. Use the full-page view for complete context.

For more information about using system auditing on Ubuntu, see [How to setup and Install Auditd on Ubuntu](https://dev.to/ajaykdl/how-to-setup-auditd-on-ubuntu-jfk), an article that is available on the dev.to website that was originally published at kubefront.com.

Validate logging prerequisites

After Microsoft Tunnel is installed, use mst-cli diagnose on the Tunnel host to check known prerequisites, including those required for logging. The logging checks show pass or fail status, the expected result, and fixes for some common failures. Checks and corrective steps vary by operating system and installation. For instructions, see Run diagnostics on the Tunnel server.

Use mst-readiness before installation to check readiness, and mst-cli diagnose on the installed Tunnel server to investigate its configuration.

For log collection and upload, review the following requirements and guidance:

  • Local logging: Use the diagnostic results to identify unmet logging prerequisites. See View Microsoft Tunnel logs to check for expected entries.
  • Upload connectivity: Allow access to the security token service and storage endpoints listed in Firewall, and review Proxy if your server uses a proxy.
  • Rootless Podman: Review the additional prerequisites for rootless Podman containers for that installation type.

Diagnostics check known requirements, not every effect of a customized or hardened operating system. Passing the logging checks doesn't confirm that an upload completed. To verify collection and upload, see Troubleshoot missing logs or failed uploads.

Network

  • Enable packet forwarding for IPv4: Each Linux server that hosts the Tunnel server software must have IP forwarding for IPv4 enabled. To check on the status of IP forwarding, on the server run one of the following generic commands as root or sudo. Both commands return a value of 0 for disabled and a value of 1 for enabled:
Daily Intune.Admin.News

Get daily email updates

Get a concise summary of the latest Microsoft Intune updates delivered straight to your inbox.

Loading the secure signup form…